Instructions:
1. Select a site between 2 fixed posts/trees that is level and free of all obstructions. Ensure the distance between the fixed posts/trees is no more than 50 ft.
2. Select positions on each post/tree that are equal in width and at least 6 feet from the ground.
3. Screw the eye hooks (A) into the selected positions so they are facing each other, with the openings facing up.
4. Slide the spring end of the cable trolley (F) over the opening of one of the openings of the eye hooks (A) and slide 1 washer (C) onto the cable trolley (B).
5. Slide the cable trolley (B) through the opening of the tie-out wheel (D) and slide the remaining washer (C) onto the cable trolley (B).6. Pull the cable trolley (b) tautand thread it through the unused eye hook (A).
7. Unscrew the nuts from the bottom of one cable clip (E) and place the "U" section around the unsecured end of the cable trolley (B). Reattach the base of the cable clip (E) and tighten the nuts with a wrench. Repeat with the remaining cable clip (E). Use wire cutters to remove any excess cable.
8. Attach a tie-out clasp (G) to the tie-out wheel (D) and the other clasp to dog's collar or harness. This trolley work best with a Top Paw Tie Out.
