AA AquariumGreen Killing Machine - Internal UV System w/Power Head by AA Aquarium
DESCRIPTION The Green Killing Machine Internal UV System with Power Head by AA Aquarium makes fighting green water easier. UV radiation is effective in controlling bacteria, yeast, molds, and other pathogens, in turn controlling algae growth. Water flows in direct contact with the UV lamp, intensifying its function of fighting green water. In addition, it can be hidden behind ornaments in your aquarium, cutting back on tubing around your tank. 9-Watt unit for up to 50 gallons; 24 Watt unit for up to 120 gallons. Features: 9W Model Treats fresh and saltwater aquariums up to 53 U.S. gallons (200 L) Completely submersible and sealed to ensure no water leakage. Has a 12V power head and control box. Includes a 9W UV lamp (replacement lamps sold separately). Built-in LED indication for UV sterilizer replacement (replace lamp tube when LED is off). Child Safe 12V low voltage design. Filtration pump (200 L/hour) and sponge included. Zigzag flow designs for maximum efficiency. Requires no tubing, has one plug to work both the UV sterilizer and filtration. All GKM products are manufactured in an EPA Registered Establishment Includes: Green Killing Machine Internal UV Kit: includes: UV Bulb; 4 Pre-filters, Pump, Control Box, Transformer Intended Pet(s): Fish Compatible With: Fresh and Saltwater Aquariums up to 50 G (9 watt) and 120 G (120W) Product Dimensions: Assembled unit measures 7 1/2 in L x 1-7/8 in W x 4 in D Capacity: 50 g Instructions: 1. Carefully remove the unit from the packing materials. Check for damage. If damaged, return product to your retailer immediately. 2. Identify components: A) 1 sealed UV Lamp Assembly - Oval Shaped B) 1 power adaptor C) 1 connection box (with 3 connection plugs) D) 1 filter pump E) 2 plastic elbows - 1 thin and 1 fat F) 4 filtration sponges - Blue G)24 Watt ONLY - 1 pump suction cup plate and 1 large ring suction cup 3. Refer to the pictures in Quick Start-Up. Holding the lamp assembly upright, attach the fat elbow to the round outlet on the bulb so it faces up. Now connect the filter pump to the elbow. Connect the thin plastic elbow to the filter pump outlet. 4. For 24-Watt version only - put suction cup plate onto pump and the large ring suction cup onto bulb housing. 5. Submerse the assembly in your tank for 30 seconds to allow air bubbles to escape. Extra bubbles provide unwanted buoyancy. 6. Locate the UV in the desired location in your aquarium making sure UV lamp assembly is covered with water. The UV lamp assembly can rotate if needed to fit to your tank. 7. To avoid the risk of short circuit by water vapor, the Control Box MUST be affixed onto the outside of the tank but NOT on the top of the tank. 8. Electrical Connections: UV Lamp Assembly to Control Box. (2 pin plug) Filter pump to Control Box. (Black male to female) Power adaptor to Control Box. (Black female to male) To operate, now plug in the power adaptor. Lighted LED on the connection box confirms operation. Caution: Always unplug the power adaptor before carrying out any maintenance. Do not expose eyes or skin to unshielded UV lamps. UV lamps emit UV radiation which may cause eye or skin injury.View details
